XANTREX XW4548


Xantrex Grid-Tie/Off-Grid Inverter/Charger 4500Watts 48 Volts XW4548

 

Xantrex XW Hybrid Inverter/Charger designed for off-grid and back-up power applications, the XW can operate with generators and renewable energy sources to provide reliable power every time. The XW Hybrid Inverter/Charger is a true sine wave inverter/charger that incorporates a DC to AC inverter, a battery charger, and an AC auto-transfer switch. It is the foundation for battery-based residential applications up to 18 kilowatts (kW), and commercial applications up to 36 kW in a three-phase configuration.
Designed with consultation and input from industry experts, dealers, and installers, the XW sets a new standard for battery-based inverter/chargers. Integrating the best features available in the market, innovative new features by Xantrex and balance-of-systems components, the XW Hybrid Inverter/Charger’s design makes installation quicker and easier. The XW offers high efficiency and unprecedented surge capacity to maximize the owner’s return on investment. No other inverter/charger looks or performs like the XW.

 

Features:

  • True sine wave output
  • Single phase (230 Vac) and three phase (400/230 Vac) configurations possible
  • Dual AC inputs
  • Several units can be connected in parallel
  • XanBus – enabled network communication
  • Unprecedented surge capacity
  • Efficient, power factor corrected, high-current, multistage battery charging

XW4548-120/240-60 – Hybrid Inverter/ChargersElectrical Specifications

Continuous output power: 4500 W
Surge rating (10 seconds): 9000 W
Surge current L-N: 70 Arms (20 sec)
L-L: 52.5 Arms (20 sec)
Waveform True sine wave
Low-load efficiency 95%
Idle consumption – search mode <8 W
AC connections AC1(grid), AC2(Generator)
AC voltage 120/240 Vac split phase
AC input breaker 60-A two pole
Utility interactive YES
CEC weighted efficiency 93%
CEC power rating 4500 W
AC input voltage range (bypass/charge mode) L-N: 80 – 150 Vac (120 V nominal); L-L: 160 – 270 Vac (240 V nominal)
AC input frequency range (bypass/charge mode) 55 – 65 Hz (default); 44 – 70 Hz (allowable)
AC1 voltage range – Sell mode (automatically adjusts when entering Sell mode)* L-N: 108 – 130 +/- 1.5 Vac; L-L: 214 – 260 +/- 3.0 Vac
DC input voltage (nominal) 50.4 VDC
DC input voltage range 44-64 Vdc
Maximum continuous charge rate 85 A
Efficiency at maximum charge rate 90.2%
Multiple-unit configurations Up to three parallel units in 120/240 volt split phase configuration
Auxiliary relay output 0-12 Vdc. maximum 250 mA DC
Non-volatile memory Yes
System network Xanbus

Mechanical Specifications

Mounting Wall mount, backplate included
Inverter dimensions (H x W x D) 23 x 16 x9″
Inverter weight 115 lb
Shipping dimensions 28 x 22.25 x 10.5 “
Shipping weight 132
Display panel Status LED, indicate AC in status, faults/warnings, equalize mode, battery level, Thre character display indicates output power or charge current, fault/warning codes. On/Off and equalize buttons
Battery temperature sensor included
Standard warranty 5 years (10 years optional)