BEON Solar Technologies provide quality installation services to its valued customers. After agreement finalized by customer and service provider (BEON Technologies) system installation procedure take place keeping in mind, a backup plan. During System installation process, good communication is essential between the customers and service provider (BEON Technologies) on a frequent basis. Any questions or problems must be addressed immediately to avoid delays and additional costs. One person from the customer’s institution should be appointed to coordinate site planning and preparation.
Site selection is the process of finding a location for outdoor and indoor Solar Electric System installation. The site location must be limited by public access in surrounding areas. The must be accessible for installation material delivery. The Electrical outlets must be at shorter distance in order to reduce energy losses.
Ground elevated and electroplated fame mount structure installation. Installation of anchor bolts and water proofing on bolted location. Minimizing joints between PV modules native DC cables and two core DC cable, IP 65,67,68 rated backplane junction box installation and load shifting on -/+ defined copper bus bars weather Proofing and Protection again external environmental changes, trucking Channel shortest path layout designing and Installation, indoor/out bride connect DC cable insulation with corrugated flexible PVC conduit.
Selection of well-ventilated area having nearest electrical outlet point.,Wall mounting of indoor equipment i.e.(inveter/charger, solar charge controller, ATS panel), Installation of battery bank rack/cabinet, proper cable routing using slotted duct or PVC conduit.
SYSTEM INTEGRATION & COMMISSIONING
System integration and output performance on shifted load, testing and commissioning.
REMOVAL OF WASTE MATERIAL
Cleaning and removal of waste material from site location upon completion of solar electric system installation.
SITE DOCUMENTATION AND DELIVERY
Complete site documentation i.e. installation related material (IRM) used, Site layout plan graphical diagram, balance adjustment, warranty terms & conditions, warranty void conditions, surge/load test, handover of operational solar electric system to designated/responsible person.